Full Bandwidth For 4K
HIGHWIRE transforms any existing analogue video cable (coax) into a high-speed Ethernet connection. This allows even a 4K IP camera to replace an analogue CCTV camera, without new cable installation.
POE Over Coax
POE Models deliver up to 25W of POE to the IP Camera, or other POE device, over up to 300m on typical RG59 cabling, exploiting the POE capability of modern devices and further simplifying installation.
Multi-Channel Options
Multichannel base and camera models are available. 32 HIGHWIRE Base channels can be installed in 1U, each delivering 25W of POE. Dual or Quad-port Camera units allow multiple channels per cable.
Smart Diagnostics
All HIGHWIRE POE models incorporate Veracity's unique SAFEVIEW diagnostics which indicates data link and POE status at both ends of the cable, plus actual POE power level available for the IP camera.
HIGHWIRE POE & EOC
Ethernet Over Coax
HIGHWIRE Products
The comprehensive product range includes single and multichannel models for both base and camera ends.
This is a brand NEW repeater
ETHERNET OVER COAX
Single channel HIGHWIRE adaptor for 100Base-TX Ethernet over new or legacy coax cabling, such as RG59 (300m), RG6 (400m) or RG11 (500m) with HIGHWIRE link status and network activity indicators.
HIGHWIRE
VHW-HW
ETHERNET & POE OVER COAX
Single channel HIGHWIRE Powerstar base-end adaptor for 100Base-TX Ethernet and POE over RG59 (300m), RG6 (400m) or RG11 (500m) coax, providing 25W POE delivery with smart power and diagnostic display.
HIGHWIRE Powerstar Base
VHW-HWPS-B
4-CH ETHERNET & POE OVER COAX
Four-channel HIGHWIRE Powerstar base adaptor for 100Base-TX Ethernet and POE over new or legacy coax, providing 30W POE output per channel and an integrated GigE network uplink port (RJ45 or SFP).
HIGHWIRE Powerstar Base 4
VHW-HWPS-B4
8-CH ETHERNET & POE OVER COAX
Eight-channel, rackmountable HIGHWIRE Powerstar base adaptor for 100Base-TX Ethernet and POE over new or legacy coax, providing 30W POE per channel with integrated GigE network uplink port (RJ45 or SFP).
HIGHWIRE Powerstar Base 8
VHW-HWPS-B8
ETHERNET & POE OVER COAX
Single channel HIGHWIRE Powerstar camera-end adaptor for 100Base-TX Ethernet and POE over RG59 (300m), RG6 (400m) or RG11 (500m) coax, providing 25W POE delivery with smart power and diagnostic display.
HIGHWIRE Powerstar Camera
VHW-HWPS-C
ETHERNET & POE OVER COAX
Single channel HIGHWIRE Powerstar camera-end adaptor for 100Base-TX Ethernet and POE, designed for mounting inside a camera housing, providing 25W POE delivery with smart power and diagnostic display.
HIGHWIRE Powerstar Backbox
VHW-HWPS-CBB
2-PORT ETHERNET & POE OVER COAX
Dual-port HIGHWIRE Powerstar camera-end adaptor for 100Base-TX Ethernet and POE over new or legacy coax, providing up to 25W POE output per port with smart power and diagnostic display.
HIGHWIRE Powerstar Duo
VHW-HWPS-C2
4-PORT ETHERNET & POE OVER COAX
Four-port HIGHWIRE Powerstar camera-end adaptor for 100Base-TX Ethernet and POE over new or legacy coax, providing up to 25W POE output per port with smart power and diagnostic display.
HIGHWIRE Powerstar Quad
VHW-HWPS-C4
ETHERNET & POE OVER COAX KIT
The Encoder Replacement Kit consists of a HIGHWIRE Powerstar Base 4, 4 x Powerstar (Camera) units and a PSU. It is designed for replacing analogue camera network video encoders when upgrading to IP cameras.
HIGHWIRE Encoder Replacement
VHW-HWPS-ERK4-UK
TAMPER-PROOF EOC & POE
The Linklock version of HIGHWIRE Powerstar Base 4 enables tamper-proof connections to IP cameras over coax cable. Both POE and data are shut down on any interference between the base and an IP camera.
HIGHWIRE Base 4 Linklock
VHW-HWPS-B4-LL
TAMPER-PROOF EOC & POE
The Linklock version of HIGHWIRE Powerstar Base 8 enables tamper-proof connections to IP cameras over coax cable. Both POE and data are shut down on any interference between the base and an IP camera.
HIGHWIRE Base 8 Linklock
VHW-HWPS-B8-LL
LONG RANGE EOC
The Longstar version of HIGHWIRE is designed for 100Base-TX transmission over very long distance coax cable runs up to 1400m on RG11 and is ideally suited to railway and perimeter protection applications.
HIGHWIRE Longstar Lite
VLS-1N-LC
LONG RANGE EOC & POE
The Longstar (Base) version of HIGHWIRE is designed for 100Base-TX transmission with POE over very long distance coax cable runs up to 1400m and is ideally suited for railways and perimeter protection.
HIGHWIRE Longstar (Base)
VLS-1P-BC
SUPPORT
Get Pre-Sales Support
Need help with choosing accessories ?
Our Pre-Sales Support team can provide all the answers you need to solve your accessory requirement or advise on the optimum solution for your application or installation. Get more information and help with accessories and configurations from our experienced team.
RESOURCES
Want to gain more knowledge?
Need a Datasheet, Quickstart Guide or A&E Spec ?
Our Resources Section lists all of our product information and documentation, including Datasheets, Quickstart Guides, A&E Specifications, Certifications and Application Notes all in one place. Return to Products for detailed technical info on each item.
HOW TO BUY
Buy Accessories
Looking for our sales channels ?
Our Accessories are available worldwide through our distribution channel network. For detailed technical information you can contact us directly. Please visit our How To Buy Section to find the nearest Veracity product distributors in your territory.
Customers | Products
A few examples to give a flavour of the sites we protect. See References and Applications for more detailed info.
CIA | HIGHWIRE
Analogue Camera Replacement
Dubai Metro | LONGSPAN
Long Distance Ethernet
NASA | CAMSWITCH
Network & POE Extension